Approved supplier are qualified with process trials at our USA plant. 由美國工廠驗證供應商批準流程
Design must exceed global industry standards for performance(3X for wire braid, 2X for wire spiral). 超越全球工業標準的設計（編織膠管3倍和纏繞管2倍脈沖性能）
Advanced Product Quality Planning used for all product validations. 所有產品按照APQP流程開發
Error proof & Q points been implemented for process quality control.防錯和質量點被執行到質量控制
Products are certified at global Lab in USA before they are released for production in Changzhou. 在常州生產授權需要在美國的全球實驗室認證合格
Each hose production lot is 100% pressure tested and must pass a minimum industry standard impulse cycle test before it is approved for customer use. 每批膠管通過保壓測試, 在客戶批準使用前必須通過工業標準的最小脈沖循環次
免責聲明：文章來源于網絡，版權歸原作者所有，如有侵權請聯系刪除
